S.No. Name of Lab   Equipments
1. Environmental Engineering Lab

 

Faculty Coordinator:

Dr Vaishali Sahu

Environmental engineering lab helps in the pollution prevention as air, water and noise testing is done in the lab. As a result of these tests, various remedies can be suggested to reduce the environmental pollution. The purpose of this lab is to make the students aware of the dangerous effects of environmental pollution. With these tests environmental protection agency can keep a check on the hazardous emissions by any industry and can protect health of common man, water toxicity, land spoiling and air pollution. – pH Meter Digital

– Conductivity Meter Digital

–  Hot Air oven, Noise Level meter

–  Spectrometer, Dissolved Oxygen meter (EI Make model-851)

– BOD Incubator, COD Digestion apparatus

– Distillation Unit

–  Systronic Make Turbidity Meter (Digital) Model 132

–  Fine Particulate, Spectrophotometer

–  Jar test apparatus

–  EI Make PH/MV/ Conductivity/TDS/

–  Muffle Furnace max., Deep Freezer Model

–  Humidity Chamber, Flouride Meter

2 Soil Mechanics & Foundation Engineering Lab

 

Faculty Coordinator:

Mr Lokesh Choudhary

The loads from any structure must be ultimately transmitted to a soil through the foundation for the structure. Thus, the foundation is an important part of a structure, the type and details of which can be decided upon only with the knowledge and application of the principles of soil mechanics. –  Direct Shear Test Apparatus

–  Triaxial Test Apparatus

–  Consolidometer

–  Permeability Test Apparatus

–  CBR Testing Apparatus

–  Hydrometer

–  UCS Test Apparatus

–  Atterberg’s Limits Test Apparatus

–  Core Cutter & Sand Replacement Apparatus

–  SPT Apparatus

3. Surveying Lab

Faculty Coordinator:

Dr Vaishali Sahu

The Surveying laboratory aids in the developments of fundamental laboratory on land surveying to civil engineering students. Laboratory comprises of instruments for distance measurements and for measuring heights of the objects. Laboratory aims with the purpose of enabling students to practice land surveying techniques using a wide spectrum of surveying equipment. –  Total Station

–  Theodolite,

–  Dumpy Level,

–  Plane Table

–  Ranging Rod, Aluminum Leveling Staff

–  Square Cross Staff, Surveying Chain

–  Arrows, Steel tape,

–  Pocket Stereoscope

–  Compass Prismatic, Tangent Clinometers

–  Subtense Bar

4 Concrete Lab

Faculty Coordinator:

Dr Archanaa Dongre

Research at the Concrete Performance Lab focuses on concrete durability, early-age properties of concrete and the pursuit of high-performance civil engineering materials. Concrete, the most widely used building material in the world, is a sustainable material when properly designed and constructed. –  Vicat’s apparatus

–  Slump test apparatus

–  Blain’s air permeability apparatus

–  Sieve set 8” (brass), 12”(GI)

–  Mould cylindrical 150*300mm

–  Mould cube 150*150*150mm

–  Mould cube mortar

–  Le-chatelier’s apparatus

–  Flow table

–  Compaction factor

–  Rebound hammer

–  Pycnometer

–  Hot air oven

–  Stop watch

–  Electronic weighing balance 100 kg, 600 gm

–  Compression testing machine (2000 kN & 500 kN)

–  Concrete mixer (55/110 Lt)

–  Sieve Shaker Motorized

–  Desiccator with plate

–  Curing Tank

–  Concrete Pan Mixer

–  Testing Instruments Spares (V-Funnel)

–  Testing Instruments Spares (J-Ring)

–  Testing Instruments Spares (L-Box)

–  Testing Instruments Spares (Kelly Ball Slump Test)

–  LVDT Range 50mm x 0.01mm

–  Flexure Testing Machine Cap -250kN

–  Extensometer

–  Concrete Permeability Apparatus

–  Beam Mould 15x15x70cm, 10x10x50cm

–  Pullout Test Apparatus (Cap:500kN)

–  Split Tensile Test Attachment

–  Hot and Cold Humidity Chamber

5. Transportation Engineering Lab

Faculty Coordinator:

Mr Shubham Bansal

Transportation engineering section of the civil engineering department is involved with multifarious activities related to highway engineering. Coarse Aggregates form the major part of the pavement structure and this is the prime material used in pavement construction. Bitumen is a petroleum product used in pavement construction works. This lab primarily deals with basic tests of Coarse

Aggregates and Bitumen.

–  Aggregate Impact Test Apparatus

–  Los-Angle s Abrasion test machine

–  Crushing value test apparatus

–  Dory’s abrasion test machine

–  Deval’s Attrition test aggregates

–  Ductility test on Bitumen

–  Viscosity test on Bitumen

–  Standard Penetrometer

–  Flash and Fire point (Bitumen)

–  Electric heater 2000 watts

6. Engineering Geology, Remote Sensing Lab

Faculty Coordinator:

Mr Shubham Bansal

 

Remote Sensing lab is equipped with the facilities of Visual Image Interpretation, Stereoscopic Projections and all type of photogrammetric and geo-referencing studies. Research work related to watershed planning and development and satellite image interpretation are performed in the lab.

Studies related with different rock and mineral identification, making tunnel cross sections, dip and strike measurement of rock formations and study of various thematic maps is carried out.

–  Compass Brunton, Compass Clinometer, Geological Model India, Geological Map of India, Tectonic Map of India, Geological Hammer, Mineral Samples, Rock Samples, GPS Garmin ETREX., Polarizing (petrological) Microscope.

–  Compensator, Igneous Rock then Section Slide, Sedimentary Rock Slide

–  Metamorphic Rock Slide, Mineral Slides, Black Surface Outline Globe (GL0028)

–  Wooden Block Model showing fold, fault, unconformity – set of 25nos.

–  3D Geomorphological model – set of 16nos. in aluminum frame

–  Hardness Scale Box, Hardness Kit Box

–  Pocket Magnet, Horse shoe type, Rocks Hand Specimens, Mineral Hand Specimens

–  Pocket Stereoscope, Book Aerial Stereo Photo (HB001), Aerial Stereo Studies (HB002)

–  Stereogram Book of Contour (HB004), Stereo Atlas (HB003)

–  Mirror Stereoscope, Parallex Bar, Planimeter Digital,

–  Planimeter Mechanical

7. Structural Analysis Lab

Faculty Coordinator:

Mr Diptendu Roy

The Structural Engineering Laboratory at NCU serves a wide spectrum of activities covering those related to teaching, research, development, and consultancy. The primary activities include experimental studies on model/prototype of structural elements and assemblies under various static and dynamic loading conditions.

With the available test area, state-of-the-art load/displacement-controlled equipment for load application, precision instrumentation, online data acquisition and monitoring, the laboratory represents a unique facility for large- and full-scale investigation of the load-deformation behavior of structures

–  Column Buckling Apparatus, Curved Members Apparatus

–  Elastic Properties of Deflected Beam App.

–  Elastically Coupled Beam Apparatus, Redundant Joint Apparatus

–  Unsymmetrical Bending Apparatus, Three Hinged Arch Apparatus

–  Two Hinged Arch Apparatus

–  Portal Frame Apparatus, Portal Frame Model

–  Verification of Clerk Maxwell’s Theorem

–  Begg’s Deformeter Set, Deflection of Truss Apparatus

8. Civil Computer Lab

Faculty Coordinator:

Mr Lokesh Choudhary

Civil Computer lab is basically designed to perform soft

simulations using various software to enhance student’s problem-solving skills. It gives students an opportunity to practice and refine their computational skills which are deemed to be very crucial and effective in modelling

–  ZWCAD

–  Matlab

–  TKSolver

–  Plaxis-2D

– Primavera P6

–  SigmaPlot

Contact Us

"By using the IT and related network resources of the NCU, you are hereby accepting to abide by all the laws of the Government of India and all rules and regulations under the Information Technology and Network Resources Policy of the NCU. Acts of any misuse or unlawful are strictly prohibited and will be dealt under the applicable laws and IT and Network Resources Policy of the NCU. "

Follow Us

Virtual Tour