Apply Now Enquire Now

National / International Conferences

YEAR 2016

  • Rohit Singh Lather,” Experimental Investigation of a single cylinder SI Engine fuelled with gasoline butanol blends”, International Conference on Alternative Energy Sources Department of Mechanical Engineering & Bio-Engineering, BIT Mesra, 2016, February.

Year 2015

  • Bhrigu Joshi and Feras Al-Hakkak,” An Introduction to Tensegrity Structures”, International Conference of Advance Research and Innovation (ICARI-2015),2015, January,284 – 288.
  • Sagun Sagar, Sandeep, Shubhendra, Vaibhav Semwal, Anmol Bhatia and Rajeev Kumar,”Current Emerging Trends in Optimization of Cutting Parameters in CNC Turning: a review”, International Conference of Advance Research and Innovation (ICARI-2015), 2015, January, 271 – 278.
  • Devendra Kumar Pathak, Deevesh Sharma, Harshit Kumar Khandelwal,” Performance Evaluation of a Cogeneration Based Fertilizer Plant: A Case Study”, International Conference of Advance Research and Innovation (ICARI-2015), 2015, January, 238 – 243.

Year 2014

  • Khushal Khera & Anmol Bhatia,” 5S Methodology, a powerful tool for improving the organization”, National Conference on Emerging technologies in Mechanical Engineering, 2014, Published in Proceedings of the Conference,26-29.

Year 2013

  • Mr. Joydeep Chakraborty and Dr. V.K. Bajpai,”   Solar Energy operated vapour absorption system”,"ISpace -13,’ NCU, Gurugram.",2013, Published in Proceedings of the Conference.       
  • Dr. Pramod Bhatia and Ms. Swati Bhardwaj”, Study of laminar jet diffusion flames”, “Space -13’ NCU, Gurugram.",2013, Published in Proceedings of the Conference.   
  • Ms. Shikha Kashyap and Prof. K.K. Chaudhary,” A brief review of occupational health hazards associated with metalliferous mines”, “Space -13’ NCU, Gurugram."2013, Published in Proceedings of the Conference.
  • Ashwini Sharma, Dixit Garg, Ashish Agarwal, “Supply chain quality management -case study of supplier of automotive OEM “, International conference on production and industrial engineering,2013, Published in Proceedings of the Conference, 579-585.
  • Dhruvay Jain and Pradeep Rohilla,” Design. Integration and Analysis of SOS Alert System, GPS and other utilities in wrist band “, National Conference on Contemporary Techniques and Technologies in Electronic Engineering (NCTTEE-2013),2013, Deenbandhu Chhotu Ram University of Science and Technology, 39-42.
  • Ashwini Sharma, Dixit Garg, Ashish Agarwal, “Quality of supply chain “, International conference on SMART technologies for mechanical engineering, 2013, Published in Proceedings of the Conference,552-557.
  • Meenu Munjal, Pramod Bhatia, “Effects of carbon dioxide addition on soot formation in hydrocarbons diffusion flames: A Review”, International Conference on Recent Trends in Mechanical Engineering, held at NCU,2013, Published in Proceedings of the Conference, 159-166.
  • Kashyap, S., Chaudhary, K. and Gupta, M,” Risk Assessment Techniques for Indian Mining Industry: A Literature Review “, International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference,167-177.
  • Amit Dhamija, Om ji Shukla and Lalit Upadahayay,” An analytic network process to hotel selection problem”, International Conference on Recent Trends in Mechanical Engineering, held at NCU,2013, Published in Proceedings of the Conference,190-201.
  • Das, P., Subbarao P.M.V and Subramanian J. P,” Effect of premixed ratio on combustion and emission characteristics of a HCCI-DI engine using multi injection strategy”, International Conference on Recent Trends in Mechanical Engineering, held at NCU,2013, Published in Proceedings of the Conference,202-218.
  • Devender K. Pathak, Shubham Verma and Avinash Samvedi,” A hybrid expert system approach for selection of a flexible manufacturing system”, International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference,219-230.
  • Md Rashid Akhtar, Karan Khurana, Gaurav, Kanishka Kohli and Mansi Malik, “Analysis of Impact for conical projectile of different materials on thin Al plates of different thickness”, International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference, 231-237.
  • Ashwini Sharma, Dixit Garg, Ashish Agarwal,” SCQM Implementation -A Case Study of Engineering Education”, International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference, 238-251.
  • K.K. Chaudhry, B.C. Nakra,” Implementation of cost effective strategies for the abatement of noise due to impulsive loading -A Case Study”, International Conference on Recent Trends in Mechanical Engineering, held at NCU,2013, Published in Proceedings of the Conference, 265-277.
  • Jena AK, Bhatia P. and Chaudhry K.K,” Thermal Management of Small Form factor consumer electronics: A Review”,  International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference, 278-288.
  • Kaushik A., Singh P. and Chaudhary, K.K. ,” Study of MHD flow on a stretching sheet with variable heat flux and constant suction”, International Conference on Recent Trends in Mechanical Engineering, held at NCU,2013, Published in Proceedings of the Conference,289-308.
  • Jain, D. and and Rohilla, P,” Root Cause Analysis, Design Enhancement & Re-engineering of Pneumatic Jaw Clamper for 1500T, 2400T & 4000T Komatsu Press Machine (Part 1)”, International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference,309-320.
  • Narwal A. and Rohilla P  ,” Design of a Modular Type Seed Drill for Variable Farm-Size”, International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference, 321-329.
  • Singh A.P., Chaudhary K.K. and Bhatia P,” Two-dimensional CFD simulation of wind circulation under different aspect ratios of a street canyon using k-ε turbulence modelling”, International Conference on Recent Trends in Mechanical Engineering, held at NCU,2013, Published in Proceedings of the Conference,330-338.
  • Sharma, A., Bangia, S., Arora, V. and Singh P.,” Human ergonomics in an all-terrain vehicle”, International Conference on Recent Trends in Mechanical Engineering, held at NCU,2013, Published in Proceedings of the Conference, 427-436.
  • Bhardwaj, S., Bhatia P., Ahuja S,” Review on Laminar jet diffusion Methane Flames”, International Conference on Recent Trends in Mechanical Engineering, held at NCU, 2013, Published in Proceedings of the Conference,408-414.
  • Ashwini Sharma,” Supply chain for disaster management-An empirical study”, ICHL 2013, 2013, Published in Proceedings of the Conference. Amit Dhamija, Om ji Shukla and Lalit Upadahayay,” Multi criteria decision analysis using AHP to improve quality of service in hotel industry: an empirical study”, International conference in industrial engineering SVNIT Surat,2013, Published in Proceedings of the Conference. 

Year 2012

  • Abhishek Pratap Singh,” Workspace and singularity analysis of six degree of freedom parallel manipulator using inverse kinematics on MATLAB”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,  2012, Published in Proceedings of the Conference, 270-278.
  • Abhishek Pratap Singh,” Kinematics model for Parallel manipulator using MATLAB for Workspace Analyses”, National Conference of Recent Advances in Applied Mathematics,2012, Published in Proceedings of the Conference,   89.
  • Ajay Verma,” Studies on Viscoelastically Damped Vibration Absorbers National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference, 133-141.
  • Ashwini Sharma, Dixit Garg, Ashish Agarwal,” Supply chain quality management case study on supplier of an Indian automotive original equipment manufacturer”, International Conference on Best Practices in Supply Chain Management,2012, SOA University, Bhubaneswar, 247-254.
  • Ashwini Sharma, Dixit Garg, Ashish Agarwal, “Quality management in supply chain – Case study of tractor industry”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,  2012, Published in Proceedings of the Conference, 218-223.
  • Dinesh Kumar and Surya Prakash, “Investigation and analysis for wrinkling behaviour of deep drawn die sheet metal component using fast form”, National Conference on TAME 2012, 2012, YMCA University of Science & Technology, 32.
  • Dinesh Kumar, Surya Prakash, Sunil Pandey, Pradeep Rohilla,”  Analysis and modelling of sheet metal component for the wrinkle free surface of deep drawing die part in fast form”,National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram, 2012, Published in Proceedings of the Conference, 290-297.
  • Joydeep Chakraborty,”  Experimental Performance Analysis of Earth- Air Heat Exchanger for Energy Efficient & Eco-friendly HVAC Systems”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram, 2012, Published in Proceedings of the Conference.         
  • K.K. Chaudhry, Ashish Chopra and Ashutosh Sharma,” Dispersion Characteristics of Pollutants from Vehicular exhausts in Street Canyons using CFD techniques”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference, 349-356.
  • Lalit Upadhayay, Satish Kumar, S.K. Mohapatra,” Experimental and CFD analysis of solid suspension in a slurry pot tester “National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference 357-363.
  • Manoj Gopaliya,” Comparative study of CFD Analysis of performance characteristics of S-shaped & Y-shaped diffusers with combined horizontal & vertical offsets”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram, 2012, Published in Proceedings of the Conference, 364-372.
  • Natraj Mishra and B.C. Nakra,”  Speed Control of a D.C. Motor using Conventional and Intelligent Control Techniques”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference, 233-243
  • Natraj Mishra and Parmeshwar S.,” Cruise Control Using Fuzzy Logic and PID Controllers”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference,244-251.
  • Natraj Mishra, Parameshwar Sathyanarayan and B.C. Nakra,” Comparison between the performance outputs of fuzzy and neuro-fuzzy based controllers used for temperature control in an electric muffle furnace”, IEEE International Conference on Electronics and Computer Technology, Volume I,2012,  Published in Proceedings of the Conference, 618-622.
  • O.P. Chawla,” Assessment of Reliability of a System Using Monte-Carlo Simulation Technique “National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012  , Published in Proceedings of the Conference, 201-213.
  • O.P. Chawla, Joydeep Chakraborty, S. Zaphar,” Experimental Performance Analysis of Earth-Air Heat Exchanger for Energy Efficient and Eco-Friendly HVAC Systems”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram, 2012, Published in Proceedings of the Conference, 379-387.
  • Om Ji Shukla, Manoj Kumar Mishra, “Implementation of Value Analysis/ Value Engineering through Go Fast Approach in an Automobile Company”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU,  Gurugram,  2012, Published in Proceedings of the Conference. 214-217.
  • Pradeep Rohilla,” Pressure control through fuzzy logic on Matlab”, National Conference of Recent Advances in Applied Mathematics,2012, Published in Proceedings of the Conference, 88
  • Pramod Bhatia, V. R. Katta, S.S. Krishnan, Y. Zheng, P.B. Sunderland, And J. P. Gore,” Detailed Chemistry Predictions for Inverse and Normal Laminar Ethane Jet Diffusion Flames under Oxygen Enhancement and Gravity-Variation”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference, 341-348
  • Rashid Akhtar,” Experimental analysis of Al beams impacted by projectiles of different nose shapes”, National conference at Hindustan College of Science & Tech, Farah, Mathura,2012, Published in Proceedings of the Conference,624-630.
  • Rashid Akhtar, Stuti Kaushal, Rakhi Khatana, Sonakshi Soni,” Impact of projectile on Al beams of different thickness”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram, 2012, Published in Proceedings of the Conference, 98-103.
  • Shikha Kashyap and K.K. Chaudhry, “Evaluation of Risk Levels in Hazardous Industries “, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram ,2012, Published in Proceedings of the Conference,184-189
  • Sunil Pandey, Surya Prakash, Dinesh Kumar, “Monitoring of rotor system using frequency component (db)”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference,104-112.
  • Swati Bhardwaj and Pramod Bhatia,” Study of Laminar Jet Diffusion Flames under Oxygen Enhancement: Review”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram,2012, Published in Proceedings of the Conference, 435-440.
  • Vinkel Arora, Gian Bhushan, M.L Aggarwal,” A Comparative study of Standard Eye and Riveted Eye Design of a Mono Leaf Spring”, National Conference on “Emerging Trend in Mechanical Engineering” at NCU, Gurugram, 2012, Published in Proceedings of the Conference, 49-55.