International Journal Publications

YEAR 2016

  • Lalit Upadhayay, Prem Vrat, "An ANP based selective assembly approach incorporating Taguchi’s quality loss function to improve quality of placements in technical institutions", The TQM Journal, International, 2016 January, Vol. 28, Issue 1, 112 - 131
  • Shiv Manjaree, Bahadur Chand Nakra, Vijyant Agarwal, "Comparative Analysis for Kinematics of 5-Dof Industrial Robotic Manipulator", Acta Mechanica Et Automatica, International, 2015 December, Vol. 9, Issue 4, 229-240
  • Mr. Vijay Singh Dalal, Mr. Vibhor Kakkar, Mr. Anmol Bhatia, "Risk Management and Assessment by Failure Mode and Effect Analysis of Vertical Balancing Machines", International Journal of Applied Engineering Research, International, 2015 September, Vol. 10, Issue 78, 174-181
  • Zhigang Wang, K. Mathiyazhagan, Lei Xu, Ali Diabat,” A decision making trial and evaluation laboratory approach to analyse the barriers to Green Supply Chain Management adoption in a food packaging company”, Journal of Cleaner production,2016, March,19-28.
  • Anmol Bhatia, Vishal sanghwan, Tushar Kaistha, Vismit Varshney & Sumit Dalal,” Energy Harvesting Through Footsteps”, International Journal of advanced engineering research & Applications,2016, February,405-412.
  • Abhishek Pratap Singh, Pramod Bhatia, and K K Chaudhary, “Effects of Elevated Metro Rail Tracks on Pollutant Dispersion in Urban Street Canyons”,  International Journal of Applied Environmental Sciences,2016,  April,425-439         .
  • Pradeep Rohilla,Abhishek Pratap Singh, "To Control Nonlinear Pneumatic System using Fuzzy Logic Controller", International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, International, 2016 April, Vol. 5, Issue 4, 491-494
  • Pradeep Rohilla,Jitender, Amit,Akshay Dhingra, "Design and Analysis of Controller for Antilock Braking System in Matlab/Simulation", International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, International, 2016 April, Vol. 5, Issue 4, 583-589
  • Tomoyuki Naito, Takafumi Yoshida, Hidehiko Mochizuki, Hiroyuki Fujishiro, Ritwik Basu, Jerzy A. Szpunar, "Vortex Pinning Properties of Dense Ti-doped MgB2 Bulks Sintered at Different Temperatures", IEEE Transactions on Applied Superconductivity, International, 2016 April, Vol. 26, Issue 3, 42491
  • Pradeep Rohilla,Shubham Mittal, Vikas Hooda ,Abhishek Pratap Singh, "Improving Productivity by Implementing Lean Manufacturing", International Journal of Engineering Research and General ScienceISSN 2091-2730, International, 2016 May, Vol. 4, Issue 3, 29-36
  • Ashwini Sharma, Dixit Garg, Ashish Agarwal, "Identification of influential quality management variables using ISM approach", International Journal Advanced Operations Management, International, 2016 May, Vol. 8, Issue 1, 38 - 63
  • Gadadhar Sahoo, IS Wani, SB Kumar, Balbir Singh, Atul Saxena, Ritwik Basu, "Effect of Ni on the Formability and Texture of Hot Rolled Weathering Steel", Journal of Metals, Materials and Minerals, International, 2015 January, Vol. 25, Issue 2, 23-29
  • K. Mathiyazhagan, A. Noorul Haq, Varun Baxi, "Analysing the barriers for the adoption of green supply chain management – the Indian plastic industry perspective", International journal of business performance andsupply chain modelling, International, 2016 April, Vol. 8, Issue 1, 46-65
  • Amit Arora, PMV Subbarao, Ravinder.S. Agarwal, "Development of parametric space for the vortex generator location for improving thermal compactness of an existing inline fin and tube heat exchanger", Applied Thermal Engineering, International, 2016 January, Vol. 98, Issue Nil, 727-742
  • Anuj Kumar Jain, Vikas Rastogi, Atul Kumar Agrawal, "Experimental Investigation of Vibration Analysis of Multi-Crack Rotor Shaft", Procedia Engineering, International, 2016 May, Vol. 144, Issue Nil, 1451-1458
  • Manoj Kumar Gopaliya, D. R. Kaushal, "Modeling of Sand-Water Slurry Flow Through Horizontal Pipe Using CFD", Journal of Hydrology & Hydromechanics, International, 2016 YET TO FINALIZED, Vol. 64, Issue YET TO FINALIZED, YET TO FINALIZED
  • Anil Kumar, Gagan Baradia, "Design and Development of Multi-Cavity and Multi Product Casting Process", International Journal of Applied Engineering Research, International, 2015 September, Vol. 10, Issue 78, 117-121
  • Ujjwal Verma, Tushar Tanwar, Vikas Yadav, Tushar Sharma, Rohit Singh Lather, Abhinav Gupta, "Computational Analysis Of Multi Cylinder S.I. Engine Intake Manifold For Power Improvement", International Journal of Applied Engineering Research, International, 2015 September, Vol. 10, Issue 78, 1 to 5
  • Vijay singh Dalal,Vibhor Kakkar, Anmol Bhatia, "The Bullwhip Effect Phenomenon in Indian Automotive supply chains", International Journal of Applied Engineering Research, International, 2015 September, Vol. 10, Issue 78, 194-198
  • Ravindra Ojha, Prem Vrat, "Strategies to Accelerate Manufacturing Growth in India: A System Dynamics–Interpretive Structural Modelling Analysis", Vision: The Journal of Business Perspective, International, 2016 June, Vol. 20, Issue 2, 1 to 16
  • Yagya Dutt Sharma, Pramod Bhatia , "Review of Solar Powered Air Conditioning Systems", International Journal of Multidisciplinary and Current Research , International, 2016 June, Vol. 4, Issue Nill, 490-492
  • Ankit Kumar, Pramod Bhatia, "Review of Aircraft Emission Reduction", International Journal of Multidisciplinary and Current Research , International, 2016 June, Vol. 4, Issue Nill, 493-495
  • Pramod Bhatia, "Oxygen Enhanced Microgravity Ethane Flames", International Journal of Current Research , International, 2016 June, Vol. 8, Issue 6, 33322-33326
  • Pramod Bhatia, "Conditioning Monitoring of Gear Boxes in Real Time", International Journal of Current Research , International, 2016 June, Vol. 8, Issue 6, 33313-33321
  • Naveen Gaur, Darpan Dhaiya, Rohit Singh Lather, "Experimental investigation of a single cylinder S.I engine fuelled with gasoline- butanol blends", Carbon Science and Technology , International, 2016 July , Vol. 8, Issue 3, 36 - 45
  • Sparsh Bhayare, Shikha Kashyap, Ravindra Ojha, "Production Cost Optimization in Food Processing Industry: Review and Analysis", Journal of Basic and Applied Engineering Research, International, 2016 September, Vol. 3, Issue 11, 1015-1018
  • Prateek Kalra, Rishab Bhardwaj, Shikha Kashyap, Ravindra Ojha, "To Increase Overall Equipment Effectiveness using Value Stream Mapping: Review and Analysis", Journal of Aeronautical and Automotive Engineering (JAAE), International, 2016 June, Vol. 3, Issue 2, 69-72
  • Dishant Aghi, Kunal Upadhayay, Shikha Kashyap, Ravindra Ojha, "Efficiency Improvement and Productivity Enhancement in Tier II Automotive Companies: Review and Analysis", Journal of Aeronautical and Automotive Engineering (JAAE), International, 2016 June, Vol. 3, Issue 2, 66-68
  • Abhishek Pratap Singh, Anuj Kumar Jain, Prateek Mahajan, "Design and Fabrication of a Ball Projecting Machine", International Journal of Advance Research and Innovation, International, 2016 November, Vol. 4, Issue 3, 587-590

YEAR 2015

  • Vibhor Kakkar, Vijay Singh Dalal, Vineet Choraria, Ashish S. Pareta, Anmol Bhatia, “Implementation of 5S Quality Tool in Manufacturing Company: A case Study”, International Journal of Scientific & technology research, 2015,     February,211-216
  • Deevesh Sharma, Devendra Kumar Pathak, Kshitij Chhikara,” Performance Analysis of a four stroke multi-cylinder spark ignition engine powered by a hydroxy gas booster”, Journal of Aeronautical and automotive engineering (JAAE), 2015, March,11 to 15
  • Sudhakara. S,” Mathematical Approach for determining the number of kanbans: a step towards non-stock production in manufacturing scenario”, International journal of advance research and innovation,2015, march,  37 to 40.
  • Manoj Kumar Gopalia, Amit Singla, Amulya Saini, “Performance Improvement of S-shaped diffuser using Suction and Blowing Methods”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE),2015, May – June,23-28.
  • Abhishek Pratap Singh, K.K. Chaudhary and Pramod Bhatia”, Effects of Elevated Metro Rail Track (EMRT) on Pollutant Concentration in Urban Street Canyons - 2D CFD Approach”, International Journal of Environmental Research and Development,2015, May,37 – 42.
  • Pramod Bhatia, Raunaq Kudesia and Shikhil Munjal,” Design and Analysis of a Formula Vehicle Based on the FSAE International Rules”, International Journal of Current Research, 2014, July,7440 – 7442.
  • Devendra Kumar Pathak and K.N. Jha,” Safety Performance Assessment of a Construction Site Using Construction Safety Index: Evidence from Indian Construction Industry”,         Journal of Safety, Health and Environment Research, 2015, May,222 – 231.
  • Ritwik Basu, Mostafa Eskandari, Latit Upadhayay, M.A. Mohtadi-Bonab, Jerzy A. Szpunar,” A Systematic investigation on the role of microstructure on phase transformation behaviour in Ni-Ti-Fe shape memory alloys Journal of alloys and compounds”,2015, May,213–222.
  • Ashwini Sharma,” Product recall: supply chain quality issue?”, International Journal of Intelligent Enterprise, 2015, May,277-293.
  • Pradeep Rohilla, Vineet Kumarand B.C. Nakra,” Investigation of intelligent control system for non-linear real time pressure control system International”, Journal of Advanced Computer Research,2015,   June,1 to 9.
  • Pradeep Rohilla,” Analysis of a fuzzy self-tuning PID controller for nonlinear pressure control system”, International journal of engineering research and technology,2015, April,665-668.
  • Sahil Seth, Shikha Kashyap and Gagan Baradia,” Expert system for small or medium enterprise: a review”, Journal of Material Science and Mechanical Engineering, 2015,  March,  170-173.
  • Swati Bhardwaj, Pramod Bhatia, Sushant Ahuja, “Analysis of Methane Diffusion Flames”, International Journal of Research in Engineering and Technology, 2014, June,  47-50.
  • Manoj Kumar Gopaliya, D.R. Kaushal, “Analysis of Effect of Grain Size on Various Parameters of Slurry Flow Through Pipeline Using CFD”, Particulate Science and Technology,  2015, July,369-384.
  • Ravindra Ojha, Prem Vrat,” Long-Term Implications of the Burgeoning Informal Labour Hiring in Indian Manufacturing Sector: A System Dynamics Analysis”, Global Journal of Flexible Manufacturing Systems Management , 2015,  July.
  • Ritwik Basu, M.A. Mohtadi-Bonab, Xu Wang, Mostafa Eskandari,” Role of microstructure on phase transformation behaviour in Ni-Ti-Fe shape memory alloys during thermal cycling”, Journal of alloys and compounds, 2015, September, 459 – 469.
  • Sudhakar S.,” Value Stream Mapping and Value Stream Design in a Complex Diesel Pump Production Flow: A Case Study”, Journal of Mechanical Engineering and Automation, 2015, Sep-15, 69-75.
  • K. Mathiyazhagan, Ali Diabat, Abbas Al-Refaie, Lei Xu, “Application of analytical hierarchy process to evaluate pressures to implement green supply chain management”, Journal of Cleaner Production,2015,15-May,229-236.
  • Lixin Shen, K. Mathiyazhagan, Devika Kannan, Wang Ying,” Study on analysing the criteria for selection of shipping carriers in Chinese shipping market using analytical hierarchy process”, Int. J. Shipping and Transport Logistics, 2015, 15-Nov, 742-757.
  • Feras Hakkak, Mahmoud Jabalameli, Mostafa Rostami, Mohamad Parnianpour,” The Tibiofemoral Joint Gaps - An Arthroscopic Study”, SDRP Journal of Biomedical Engineering,2015, October,1 to 6.
  • Sumangal Chugh, Sourav Kant, Deepak Monga, Devendra Kumar Pathak, “Dehumidification of Indoor Air Using Integrated Solar Powered Evaporative Air Cooler”, International Journal of Applied Engineering Research,2015, October,208-212.
  • Lalit Upadhayay, Prem Vrat,” An ANP based selective assembly approach incorporating Taguchi’s quality loss function to improve quality of placements in technical institutions”, The TQM Journal,2016, January,112 – 131.
  • Shiv MANJAREE, Bahadur Chand NAKRA, Vijyant,” AGARWAL COMPARATIVE ANALYSIS FOR KINEMATICS OF 5-DOF INDUSTRIAL ROBOTIC MANIPULATOR”, acta mechanica et automatic,2015, December,229-240.
  • Mr. Vijay Singh Dalal, Mr. Vibhor Kakkar, Mr. Anmol Bhatia, “Risk Management and Assessment by Failure Mode and Effect Analysis of Vertical Balancing Machines”, International Journal of Applied Engineering Research,2015, September, 174-181.

YEAR 2014

  • Manoj Kumar Gopaliya, Arhap Partap Jain, Chirag Singhal,” CFD analysis of heat generation and dissipation in laptop”, International Journal of Advances in Science and Technology, Vol. 8, No.1, 2014,12-27.
  • Ashwini Sharma, Prof. Dixit Garg, Dr. Ashish Agarwal, “Study of quality parameters in supply chain of different industries”, Industrial engineering journal, 2014, 9-14.
  • Swati Bhardwaj and Sushant Ahuja, “Laminar jet methane diffusion flames under oxygen enrich environment”,  International journal of applied engineering research,  2014,341-344.
  • Ravindra Ojha (ITMU), Mansoor Anwar (GKN) and Rajeev Dogra (GKN),” Variable earning for workmen in a volatile demand scenario”, Industrial Engineering journal, 2014, 25-28.
  • Manoj Kumar Gopaliya, Piyush Jain, Sumit Kumar, Vibha Yadav, Sumit Singh,” Performance Improvement of S-shaped diffuser using momentum imparting technique”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE),2014, 23-31.
  • Dheeraj Duhan, Nishant Arya, Prateek Dhanda, Lalit Upadhayay, K. Mathiyazhagan,” Application of Queuing Theory to address Traffic problems at a Highway Toll Plaza”, Applied Mechanics and Materials Trans Tech Publications, Switzerland, 2014,2583-2587.
  • Ali Diabata Devika Kannanb, K. Mathiyazhagan,” Analysis of Enablers for implementation of sustainable supply chain management – A textile case”, Journal of Cleaner Production,2014              .
  • Peng Jia, A. Diabat, K. Mathiyazhagan,” Analyzing the SSCM practices in the mining and mineral industry by ISM approach”, Resources Policy,  2014.    
  • Vivek Kumar and Abhishek Pratap Singh,”Study of Flow Structure and its effect on Indian Train Using C.F.D. Technique”, International Journal of Advanced Mechanical Engineering, ISSN 2250-3234,2014,463-468.
  • Khushal Khera, Anmol Bhatia, Sanjay Kumar & Mehul Bhatia, “Investigation of the Effects of Various Heat Treatment Processes on Microstructure & Hardness with Respect to Corrosion Behaviour for Carbon Steels”, International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249 – 8958, 2014,72-75.
  • Anmol Bhatia, Sanjay Kumar & Parveen Kumar,” A study to achieve minimum surface roughness in WEDM”, Procedia Material Science Journal of Elsevier (science direct),2014,2560-2566.
  • Ravindra Ojha Anil K. Vij Prem Vrat,” Manufacturing excellence and its critical factors An interpretive structural methodology application”, Journal of Advances in Management Research,2014,312 – 332.
  • Kushal Khera, Anmol Bhatia, Sanjay Kumar and Shailesh Mahawal,” Design and Manufacturing of Simple Catapult”, International journal of current engineering and technology, 2014,3810-3813.

YEAR 2013

  • Shiv Manjree,” Inverse Kinematic Analysis of 3-degree-of-freedom Robotic Manipulator by three different methods”, International Journal of Advances in Science and Technology, 2013, 71-80.
  • Lalit Upadhyay, Prem Vrat,” Quality Paradox in Technical Education in India: An Empirical Study”, Industrial Engineering Journal,2013,22-29.
  • Abhishek Pratap Singh,” Vehicular pollutants Dispersion Modelling analysis in Street canyons using Computational Fluid Dynamics (CFD)”, International Journal of Engineering Research and Technology, 2013, 1613-1620.
  • Ashwini Sharma, Dixit Garg, Ashish Agarwal, “Study of supply chain quality parameters”, Global Journal of Enterprise Information Systems,2013, 11-18.
  • Joydeep Chakravarty,” A Review Paper on Solar Energy operated Vapour Absorption System using LiBr-H2O”, International Journal of Engineering Research and Technology, 2013,1-3.
  • Abhishek Pratap Singh, Pradeep Rohilla,” Design, fabrication and control of a hexapod robot “, International Journal of Engineering Research and Technology, 2013, 1726-1730.
  • Om Ji Shukla and Anil Kumar Mishra, “Easily and economically feasible value analysis & value engineering concepts in manufacturing industry “, International Journal Engineering Management Review            , 2013, 81-85.
  • Shikha verma,” Risk Assessment in mining industry”, International Journal of Mining & Minerals Engineering, 2013, 312-332.
  • Shiv Manjree,”  Kinematics analysis using neuro-fuzzy intelligent technique for robotic manipulator”, International Journal of Engineering Research and Technology, 2013, 557-562.
  • Swati Bhardwaj, Siddharth Panth,” Properties and welding procedure for GRADE 91 Alloy Steel”, International Journal of Engineering Research and Technology, 2013, 767-772.
  • Lalit Upadhyay, Akanksha Tiwari,” Applications of TQM and engineering techniques to optimize quality of paint on steering wheel components: A literature review”, International Journal of Mechanical Engineering Research, 2013, 565-572.

YEAR 2012

  • Ashwini Sharma, Dixit Garg, Ashish Agarwal, “Quality Management in Supply Chain - The Literature Review”, International Journal of Quality Research, 2012, 193-206.
  • K.K. Chaudhary ,” Vehicular Pollution Dispersion for Urban intersection and Its Modelling”, International Journal of Theoretical and Applied Mechanics, 2012               .
  • Pramod Bhatia,” Simulations of normal and inverse laminar diffusion flames under oxygen enhancement and gravity variation”, Combustion Theory and Modelling, 2012, 774-798.

YEAR 2011

  • K.B. Sehgal and Shahzad Ahmad,” Study and Optimization of Process Parameters in Abrasive Jet Machining”, International Journal of Engineering and Manufacturing Science, 2011, 2249-3115.
  • Manoj Kumar Gopaliya, Piyush Goel, Sunil Prashar, Anil Dutt,” CFD analysis of performance characteristics of S-shaped diffusers with combined horizontal and vertical offsets”, Computers and Fluids, 2011, 280-290.
  • Sunil Pandey, B.C. Nakra,” Vibration Monitoring of a Rotor System using RMS acceleration m/s2”, International Journal of Engineering Science and Technology, 2011, 2559-2572.
  • Suparna M. and K.K. Chaudhary,” Vehicular Pollution Dispersion for Urban Intersection and its Modelling”, International Journal of Theoretical and Applied Mechanics, 2011, 117-125.
  • Vinkel Arora, M.L Aggarwal and Gian Bhushan,” A Comparative study of CAE and Experimental results of leaf Springs in Automotive vehicle”, International Journal of Engineering Science and Technology (IJEST),2011,6856-6866.